EU Reverse Charge VAT: How to Invoice Business Clients in Other EU Countries
In this article
Working with clients in other EU countries is one of the great advantages of freelancing in Europe. A designer in Utrecht can work for a startup in Berlin, and a developer in Munich can build software for an agency in Lyon. But the first time you invoice a business client in another member state, a VAT question appears that domestic work never raised: do you charge your own country's VAT, the client's country's VAT, or none at all?
For most business-to-business services, the answer is the reverse charge mechanism. This guide explains how it works, when it applies, what your invoice must show, and the reporting that comes with it. As always with tax, the rules have exceptions, so confirm your specific situation with an accountant or your tax authority.
The Basic Rule: Services Are Taxed Where the Business Customer Is
Under the EU VAT Directive, the general rule for business-to-business services is that VAT is due in the country where the customer is established, not where the supplier is. So if you, based in the Netherlands, provide consulting to a business in Germany, the place of supply is Germany.
That would normally mean you have to register for VAT in Germany and charge German VAT. To avoid forcing every small supplier to register in every country they sell to, the EU uses the reverse charge mechanism. Instead of you charging VAT, the obligation shifts to your business customer. They calculate the VAT themselves in their own VAT return, and in most cases deduct it again in the same return, so the net effect for them is usually zero.
For you, the result is simple: you issue an invoice without VAT, with a statement explaining why.
When the Reverse Charge Applies
The reverse charge for cross-border services generally applies when all of the following are true:
- You are a VAT-registered business in one EU member state.
- Your customer is a business, not a private consumer, established in a different EU member state.
- Your customer has a valid VAT identification number.
- The service falls under the general B2B place-of-supply rule.
Most freelance services fall under that general rule: consulting, design, software development, marketing, writing, translation, and similar work. Some services have their own rules and may not qualify, including:
- Services connected to land or property, such as architecture for a specific building or construction work, which are taxed where the property is located.
- Admission to events such as conferences and trade fairs, which is generally taxed where the event takes place.
- Passenger transport, restaurant and catering services, and short-term rental of means of transport.
If your work falls into one of these categories, check the specific rules before invoicing.
Verify the Customer's VAT Number
The reverse charge depends on your customer being a VAT-registered business. Before you send the first invoice, verify their VAT number using the European Commission's VIES system, which is free online. Save a record of the check, such as a screenshot or the consultation number VIES provides, with the date.
If the number is invalid and you invoice without VAT anyway, your own tax authority may later treat the sale as if VAT should have been charged, leaving you to pay it. Checking takes a minute and is your evidence that you acted in good faith. It is worth repeating the check periodically for long-term clients.
What the Invoice Must Show
A reverse charge invoice contains all the normal elements of a VAT invoice, plus a few specific items:
- Your VAT number and your customer's VAT number, both clearly shown.
- The net amount, with no VAT charged, or VAT shown as 0% with an explanation.
- A clear statement that the reverse charge applies. The EU directive requires the words "Reverse charge." Many businesses also add a reference to the legal basis, such as "VAT reverse charge, Article 196 of Council Directive 2006/112/EC."
- The usual details: invoice number, date, your name and address, the customer's name and address, a description of the service, and the date the service was performed or completed.
Some countries have customary local wording that you can include alongside or instead of the English phrase. In the Netherlands, invoices often say "btw verlegd." In Germany, the common wording is "Steuerschuldnerschaft des Leistungsempfängers." Including the English "Reverse charge" alongside your local phrase ensures the customer's accounting team, wherever they are, recognizes it.
If your invoicing tool lets you set a tax rate per invoice, set it to 0% for reverse charge clients and add the reverse charge note as a standard footer. Saving both on the client record means you do not have to remember them each time.
A Worked Example
A freelance UX designer based in Amsterdam completes a €6,000 project for a software company in Munich. The Munich company provides its German VAT number, which the designer checks in VIES and finds valid.
The designer's invoice shows: net amount €6,000; VAT 0%; total €6,000. Under the totals, it states: "Reverse charge – VAT to be accounted for by the recipient (Article 196, Directive 2006/112/EC). Btw verlegd." Both VAT numbers appear in the header.
The Munich company pays €6,000. In its German VAT return, it reports German VAT on the €6,000 and, as a fully taxable business, deducts the same amount as input VAT. The designer reports the €6,000 as an intra-EU service in their Dutch VAT return and on the EC Sales List.
Reporting: Your VAT Return and the EC Sales List
Even though you charged no VAT, the sale still has to be reported. In most member states this means two things:
- Your VAT return. The net value of reverse charge services to other EU businesses usually goes in a specific box for intra-EU supplies of services.
- The EC Sales List. Also called the recapitulative statement, this lists each EU business customer, their VAT number, and the total value of services supplied to them in the period. In the Netherlands it is called the "opgaaf intracommunautaire prestaties" (ICP), and in Germany the "Zusammenfassende Meldung."
Tax authorities compare these lists across countries to check that customers are reporting the reverse charge VAT. Mismatches can trigger questions, so make sure the VAT numbers and amounts on your invoices match what you report.
What About Small Business Schemes?
Many EU countries have small business VAT exemptions, such as the Dutch KOR or the German Kleinunternehmerregelung. If you use one of these schemes, the cross-border rules interact with it in ways that depend on your country and situation. In some cases you may still need a VAT number for intra-EU services even if you do not charge VAT domestically. This is an area where a short conversation with an accountant is well worth it.
Clients Outside the EU
The EU reverse charge applies only between EU member states. For business clients outside the EU, such as in the United States or the United Kingdom, most B2B services are generally outside the scope of EU VAT, and you invoice without VAT, often with a note such as "Outside the scope of EU VAT" or the equivalent local wording your accountant recommends. The client may have obligations in their own country, but that is their responsibility under their local rules.
Common Mistakes to Avoid
- Charging your domestic VAT to an EU business client out of habit.
- Applying the reverse charge to private individuals, who do not have VAT numbers. B2C services generally follow different rules.
- Forgetting to verify the VAT number in VIES.
- Leaving the reverse charge statement off the invoice.
- Not filing the EC Sales List, or filing it with figures that do not match your invoices.
Once you set it up correctly, the reverse charge is one of the simplest parts of cross-border freelancing. Verify the number, show both VAT IDs, add the reverse charge note, and report the sale. After the first few invoices, it becomes routine.
Related Articles
Milestone Billing: How to Structure Payments on Long Projects
Milestone billing keeps cash flowing on long projects. Learn how to define deliverables, weight payments, and set approval rules that keep invoices moving.
Matched, Unmatched, Reconciled: How Payment Status Actually Works
Every recorded payment carries a status that determines whether it counts toward an invoice's paid amount at all — and deleting an invoice doesn't delete its payments, it unmatches them.
How the CSV Payment Importer Matches Payments to Invoices
Bulk-importing a bank or payment-processor CSV runs every row through a matching heuristic that looks for an invoice number or a client name plus a near-exact amount — anything it can't match stays unmatched rather than getting guessed.
Why Your Reports Show Separate Totals Per Currency
There's no exchange-rate conversion anywhere in the reporting layer — here's why that's a deliberate design choice, not a missing feature.
How the Tax Summary Report Calculates What You Owe
Why the tax summary report groups by invoice date instead of payment date, and how taxable revenue is derived rather than stored.
Why Your Invoice Tax Total Is Off By a Penny
You add up the line items yourself, apply the tax rate you know is correct, and the number you land on is a cent or two different from what's printed on the invoice. Nothing was overcharged, nothing was miscalculated in any meaningful se...